Yeni Zelanda NZS CISPR 32, multimedya ekipmanının test edilmesi için geçerlidir. EMC düzenleyici uyumluluk testinde lider olan Kuruluşumuz, elektronik ekipman üreticilerine EMC testlerinde yardımcı olur. IEC, EN ve diğer EMC test gerekliliklerini karşılamak zor olabilir. Sadece zorlukları anlamakla kalmıyoruz, aynı zamanda şirketlere süreç boyunca rehberlik etmeye de yardımcı oluyoruz.
Kuruluşumuz, istenmeyen tüm radyatör testi ihtiyaçlarınızın karşılanacağına dair gönül rahatlığı sağlamaktan gurur duyar. Kuruluşumuzun doğru test raporları, “dört göz” yaklaşımımız kullanılarak hızlı bir şekilde teslim edilir. Bu, birden fazla mühendis ve teknisyenin her raporu inceleyerek gerekli tüm bilgilerin mevcut olduğundan emin olduğu anlamına gelir. Ek olarak, kanıtlanmış sürecimiz, ürün lansman gecikmelerini önlemeye yardımcı olur.
CISPR 32 Elektromanyetik Uyumluluk EMC Testinin Özeti
Bu stanar multimedya ekipmanı için tasarlanmıştır. Bununla birlikte, ekipmanın 600 V'u aşmayan rms AC veya DC besleme voltajı derecesine sahip olması gerekir. CISPR 32 için yayılan emisyon gereksinimlerinin, radyo vericilerinin uluslararası yayınlarına uygulanması amaçlanmamıştır.
CISPR 13 ve 22 kapsamındaki ekipmanlar da bu elektromanyetik uyumluluk, EMC kapsamındadır. Multimedya ekipmanı (MME), profesyonel kullanım için tasarlanmıştır.
Bu EMC testinin kapsamının karşılaması gereken iki amacı vardır:
- EMC standardı, radyo spektrumunun yeterli düzeyde korunmasını sağlayan gereksinimleri oluşturmak için kullanılır.
- CISPR 32, ölçümlerin tekrarlanabilirliğini ve sonuçların tekrarlanabilirliğini sağlamak için prosedürleri belirtmek için kullanılır.
EMC multimedya ekipmanı, bilgi teknolojisi, ses, video, yayın alıcısı, eğlence ışık kontrolü veya bunların bir kombinasyonu için kullanılan ekipmandır. CISPR 32 ya A sınıfı ya da B Sınıfı gereksinimlerine uygunluk. Uyumluluk, fonksiyonlarını aynı anda, ayrı ayrı veya ikisinin bir kombinasyonunu çalıştırırken EUT'nin emisyonlarının ölçülmesiyle gösterilir.
NZS CISPR 32 EMC Uyumluluk Testinin Kapsamı
Emisyon seviyelerinin ölçümü için kullanılacak Yeni Zelanda NZS 32 prosedürleri birkaç faktöre bağlıdır. Bunlar şunları içerir:
- Test edilen ekipmanın türü (EUT)
- Bağlantı noktası türü
- Kullanılan kablo türleri
- Frekans aralığı
- Çalışma modu.
Bir test raporu derlemek için genel elektromanyetik uyumluluk gereksinimleri IEC 17025'te bulunur. Ayrıca, resmi ölçümleri yeniden oluşturmak ve tamamlamak için yeterli ayrıntı sağlanmalıdır.
NZS CISPR 32, EUT'nin çalışma modunu belirtecektir. Rapor, bağlantı noktalarının test boyunca nasıl kullanıldığını açıklayacaktır. Test, ürünün A Sınıfı veya B Sınıfı ekipmanla uyumlu olup olmadığını göstermelidir.
EMC CISPR 32 Yeni Zelanda test raporu, her dedektör tipi için sınıra göre en yüksek emisyonlardan en az altısının ölçümlerini de içerecektir. Mevzuata uygunluk sonuçları, her bir emisyon için aşağıdakiler gibi bilgileri içerir:
- Liman değerlendirildi
- AC güç hattı ölçümleri için test edilen hat
- Emisyonun frekansı ve genliği
- Belirtilen limite göre marj
- Emisyon frekansındaki sınır
- Kullanılan dedektör.
NZS CISPR 32 EMC Radyo Frekans Bozulma Testi söz konusu olduğunda Science by EUROLAB, 25 yılı aşkın endüstriyel laboratuvar tecrübesi, uzman ekibi ve son teknoloji araçları ile sizlere en iyi hizmeti sunmayı taahhüt eder.