IEC 62310 laboratuvar test yöntemi, bağımsız çalışan ac statik transfer sistemlerinin yük beslemesinin sürekliliğini sağlamasını sağlar. EMC düzenleyici uyumluluk testinde lider olan Kuruluşumuz, elektronik ekipman üreticilerine EMC testlerinde yardımcı olur. IEC, EN ve diğer EMC test gerekliliklerini karşılamak zor olabilir. Sadece zorlukları anlamakla kalmıyoruz, aynı zamanda şirketlere süreç boyunca rehberlik etmeye de yardımcı oluyoruz.
IEC 62310 EMC Statik Transfer Sistemi Testinin Özeti
Statik transfer sistemleri (STS), güç kesintisi olsun veya olmasın kontrollü transfer yoluyla yük beslemesinin sürekliliğini sağlamalıdır. Bu, iki veya daha fazla bağımsız ac kaynağından test edilir.
IEC 62310 kasıtsız radyatör standardı, anahtarlama elemanları, bunların kontrolü ve koruyucu elemanlar için gereksinimleri içerir. Ayrıca, standart yalnızca tek fazlı, faz fazlı veya üç fazlı uygulamalarda kullanılması amaçlanan 1.000 V ac'ye kadar olan sistemler için geçerlidir.
IEC 62310 elektromanyetik uyumluluk gereksinimleri, kamuya açık veya endüstriyel yerlerde statik transfer sistemleri için yeterli EMC seviyelerini sağlamak üzere seçilmiştir.
Son olarak, IEC 62310 standardı aşağıdakiler için geçerli değildir:
- DC kaynak anahtarlama için cihazlar.
- Tek kaynaklı sistemler.
Elektromekanik anahtarlama cihazları kullanan transfer sistemleri, transfer sırasında yük beslemesinin kesilmesi ile acil durum güç sistemlerinde kullanılmak üzere tasarlanmıştır.
IEC 62310 Laboratuvar Uygunluk Testi Bilgilerinin Kapsamı
IEC 62310 uygunluk testi standardı testinde dikkat edilmesi gereken birden fazla emisyon ve bağışıklık gereksinimleri ve koşulları vardır.
Emisyon
EMC 62310 emisyon testi için genel gereksinimler, 0 ila 1,0 GHz frekans aralığındaki bozulmaları içerir. Emisyon sınırları, belirli test yöntemleriyle birlikte seçilen temel elektromanyetik gereksinimleri temsil eder. Bu gereksinimler, normal olarak çalışan STS tarafından üretilen bozulmaların, diğer aparatların amaçlandığı gibi çalışmasını engelleyen istenmeyen seviyelere ulaşmamasını sağlar.
Gereksinimler, her STS portu için belirtilmiştir. Bu, STS kategorisi dikkate alınarak iletilen ve yayılan emisyonların geçerli emisyon sınırlarına uymak için yapılır. Emisyon limitleri ayrıca aşağıdaki ölçüm koşullarına uygun olmalıdır:
- Nominal giriş voltajı;
- Giriş kaynakları ve yük ile ilgili tüm çalışma modları kombinasyonları;
- En yüksek emisyon seviyesi ile sonuçlanan lineer yük akımında.
- Son olarak, aksesuarlara bağlantı için ac çıkış terminalli STS için terminaller, portları çalıştırmak için gerekli minimum aksesuar konfigürasyonuna bağlanır.
- 0 Hz ila 1 GHz frekans aralığında IEC 62310 bağışıklık gereksinimleri karşılanır.
IEC 62310 EMC test gereksinimleri, temel elektromanyetik uyumluluk bağışıklık gereksinimlerini temsil eder. Ek olarak, dikkate alınan her bağlantı noktası için IEC 62310 gereksinimleri belirtilmiştir. Ayrıca bu standartta belirtilen seviyeler endüstriyel ortamlardaki durumları kapsamamaktadır. Seviyeler ayrıca herhangi bir yerde meydana gelebilecek, ancak meydana gelme olasılığı son derece düşük olan aşırı durumları da kapsamaz.
Test, STS ile aşağıdaki koşullarda gerçekleştirilir:
- Anma giriş voltajı.
- Herhangi bir normal çalışma modu.
- Nominal akımda lineer yük. Hafif yük test koşulu, belirli belirli akımlar için kabul edilebilir.
Yüksek frekanslı bozulma testleri için minimum bağışıklık gereksinimleri, uygunluk standardı ve test tesisi tarafından belirlenir. STS'nin belirli bir bağışıklığa sahip olacak şekilde tasarlanmış olması durumunda, son tüketici tarafından kullanılmadan önce bilgiler kurulum/kullanım kılavuzuna yazılmalıdır.
Ek olarak, test cihazının düşük frekanslı sinyallere karşı bağışıklığa, güç-frekanslı manyetik alanlara karşı bağışıklığa ve voltaj düşüşlerine karşı bağışıklığa tabi tutulacağını belirtmek önemlidir.
IEC 62310 Statik Transfer Sistemi Testi söz konusu olduğunda Science by EUROLAB, 25 yılı aşkın endüstriyel laboratuvar tecrübesi, uzman ekibi ve son teknoloji araçları ile sizlere en iyi hizmeti sunmayı taahhüt eder.