IEC 61000-4-17, harici doğrultucu sistemler tarafından sağlanan ekipmanın düşük voltajlı dc güç bağlantı noktaları veya şarj edilmekte olan piller için geçerlidir. Bu standardın amacı, doğrultucu sistemler ve/veya dc güç kaynağı kaynakları üzerinde bulunan yardımcı servis pil şarj cihazları tarafından üretilenler gibi dalgalanma voltajlarına maruz kaldığında, bir laboratuvarda, elektrikli ve elektronik cihazlarda test için ortak ve tekrarlanabilir bir temel oluşturmaktır.
IEC 61000-4-17
- test gerilimi dalga biçimi
- test seviyeleri aralığı
- test üreteci
- ttest kurulumu
- test prosedürü.
Bundan sonra IEC 61000-4-17 tarafından açıklanan test, elektrikli veya elektronik ekipman ve sistemler için geçerlidir. Ayrıca, test edilen ekipmanın (EUT) anma gücü, madde 6'da belirtilen test jeneratörü kapasitesinden daha büyük olduğunda modüller veya alt sistemler için de geçerlidir. Bu test, anahtarlamalı dönüştürücüler içeren akü şarj sistemlerine bağlı ekipmana uygulanmaz.
Test seviyeleri, nominal dc voltajın Ud.c yüzdesi olarak ifade edilen tepeden tepeye voltajdır. Dalgalanma voltajının genliği, şekil 1'de Umax – Umin farkı ile temsil edilmektedir.
Dalgalanmanın frekansı, bir ürün komitesi tarafından veya EUT imalatçısının spesifikasyonlarına göre veya redresör sisteminin özelliklerine göre belirtildiği gibi güç frekansı veya bunun katları 2, 3 veya 6'dır.
Test jeneratörünün çıkışındaki dalgalanma voltajının dalga biçimi, sinüzoid-doğrusal bir karaktere sahiptir. Sinüzoidal-doğrusal bir karakteristik, bir sinüs dalgasının ve doğrultulmuş dalganın azalan tarafına teğet olan ve aşağıdaki yarım dalganın yükselen kenarıyla kesişen bir çizginin bir parçası olarak tanımlanabilir; sinüs dalgasının tepe değeri ile sonraki yarım dalganın kesişme noktası arasındaki voltaj farkı dalgalanma voltajıdır.
Test jeneratörü, aşağıdaki ana özelliklerle sürekli modda çalışabilmelidir:
- Çıkış voltajı aralığı (360 V'a kadar)
- Yük ile çıkış voltajı değişimi: (0 ila nominal akım) %5'ten az
- Çıkış voltajı dalga biçimi: DC voltajının üzerine bindirilmiş, sinüzoid-doğrusal karakterli, güç frekansında veya onun katlarında alternatif bileşen
- Çıkış akımı (sabit durum): 25 A'ya kadar
- Pik çıkış akımı kapasitesi: (izin verilen maksimum süre 5 ms) sabit durum akımının +2,5/0,5 katı
- Dalgalanma frekansı toleransı: +/- % 1
Daha yüksek veya daha düşük voltaj/akım kapasitesine sahip bir jeneratörün kullanımına, diğer özelliklerin (dalga biçimi, yük ile değişim, tepe çıkış akımı/kararlı durum akım oranı, vb.) korunması şartıyla izin verilir. Test jeneratörü çıkış gücü/akım kapasitesi, EUT güç/akım derecelendirmelerinden en az %20 daha büyük olmalıdır. Jeneratör, pozitif voltaj çıkışı ile pozitif ve negatif tepe akımı üretebilmelidir.
IEC 61000-4-17 söz konusu olduğunda Science by EUROLAB, 25 yılı aşkın endüstriyel laboratuvar tecrübesi, uzman ekibi ve son teknoloji araçları ile sizlere en iyi hizmeti sunmayı taahhüt eder.