Herhangi bir bağımsız laboratuvarın en büyük kapasitelerinden birine sahip olan kuruluşumuzun küresel olarak konumlandırılmış laboratuvarları, ISO, ASTM, NACE ve CSA dahil olmak üzere uluslararası kabul görmüş bir dizi standartta birden fazla katodik ayrışma testi sunar.
Katodik ayrışma nedir?
Katodik ayrışma, kaplama filmindeki kusurlarda (tatillerde) katodik koruma akımının kusurlu bölgede alt tabakaya geçmesiyle oluşan katodik reaksiyon ürünlerinin neden olduğu, kaplama ile uygulandığı kaplanmış altlık arasındaki yapışmanın bozulmasıdır. Bu, katotta (substrat) hidroksil gruplarının oluşumuna ve kaplamanın yapışma kaybına ve dolayısıyla substrattan ayrılmaya neden olabilen polarize bir potansiyele yol açar.
Katodik ayrışma testinin amacı, kaplama koruma sisteminin, kurban veya etkilenen akım akışlarına maruz kaldığında davranışını araştırmaktır.
Katodik ayrışma testi, genellikle bir kaplamanın farklı ortamlar için uygunluğunu belirlemek için bir dizi testin parçası olarak kullanılır. Ayrıca, katodik koruma sistemi ile bir kaplama şeması etkileşimini değerlendirmek için bağımsız bir test olarak kullanılır. Kuruluşumuz, saatlerden aylara kadar çok çeşitli test sürelerini ve ayrıca ortam ile 204°C arasında değişen farklı voltaj ve sıcaklıkları kapsayan katodik bağlanma testleri sağlar.
Katodik ayrışma test yöntemleri
Her test yönteminin kendi parametre seti ve test koşulları vardır. Aralarından seçim yapabileceğiniz birçok test yöntemiyle uzmanlarımız, proje ihtiyaçlarınıza en uygun süreci seçmenize yardımcı olur.
Yüksek sıcaklıklarda katodik ayrışma testi
Açık deniz Petrol ve Gaz ve boru hattı endüstrisinde sıcaklıklar sürekli olarak arttığından, kaplama bozulmasını daha iyi anlamak için yüksek sıcaklıklarda testlere yönelik artan bir talep vardır. Kuruluşumuz, su altındaki yüksek sıcaklık yapılarındaki kaplamaların maruz kalma koşullarını simüle eden açık deniz yapısal kaplamaları için katodik ayrışma testleri gerçekleştirir.
Test ettiğimiz katodik ayrışma standartlarına örnekler
- ISO 21809-1 ve -3 (ortam ve yüksek sıcaklık)
- ISO 15711
- ISO 12944-9
- Norsok M-501 (Sistem 7C için ortam ve yükseltilmiş, 204°C'ye kadar(400F))
- NACE TM104, 204, 304, 404
- NACE SP0394 (yüksek sıcaklık)
- CSA Z245.20 ve 21
Association Française de Normalization
- AFNOR NF A49-711 (1992), Annex K
- AFNOR NF EN 10329 (A49-716), Annex E
- AFNOR NF-A 49.711, NF-A 49-716
Ulusal Korozyon Mühendisleri Derneği
- NACE RP0394-2002, Ek F
- NACE TM0104,
- NACE TM0304,
- NACE RP0394, Uygulama F
- NACE SP0394
Kanada Standartları Derneği
- CSA Z245.20-14 Güncelleme No.1, Mart-15 Sn. 12.8,
- CSA Z245.20 Bölüm 12.8;
Uluslararası Standardizasyon Örgütü
- ISO 21809
- ISO 20340
- ISO 15711
Amerikan Test ve Malzemeler Derneği
- ASTM G8
- ASTM G42 (yüksek sıcaklık)
- ASTM G95
İngiliz Standartları Enstitüsü
- BS 3900: Bölüm F11:1985
Avrupa Standartları
- EN 10329; NF-A 49-710
Katodik Ayrılma Testi söz konusu olduğunda Science by EUROLAB, 25 yılı aşkın endüstriyel laboratuvar tecrübesi, uzman ekibi ve son teknoloji araçları ile sizlere en iyi hizmeti sunmayı taahhüt eder.