USP Fizikokimyasal test serisi, plastiklerin veya polimerlerin hem fiziksel hem de kimyasal özelliklerini karakterize etmeye yardımcı olmak için tasarlanmıştır. Bu yöntem homojen plastik numuneler için tasarlanmıştır, ancak istenirse diğer numune türlerine de uygulanabilir.
USP Genel Bölüm 32 ve Ulusal Formüler 27, 2009 yönetmeliklerine uymak için test yapılması gereklidir. Prosedür USP Genel Bölüm 661'de açıklanmıştır. Science by EUROLAB, farklı plastik türlerini test etme konusunda kapsamlı deneyim sunar.
Uygulanabilir Standartlar
- USP 661
Örnek Özellikler
- PCT101 : 20 gram, 300 cm2 (>0.5 mm kalınlık ise) veya 600 cm2 (<0.5 mm kalınlık)
- PCT105 : 20 gram, 300 cm2 (>0.5 mm kalınlık ise) veya 600 cm2 (<0.5 mm kalınlık)
Çalışma Anahattı
USP Fizikokimyasal testi dört analizden oluşabilir: tamponlama kapasitesi, uçucu olmayan kalıntı (NVR), tutuşma kalıntısı (ROI) veya ağır metaller.
Numune Ekstraksiyonu
Numune, gerekli ekstraksiyon ortamında 70 ± 2°C'de (su ve alkol) veya 50 ± 2°C'de (heksanlar) 24 ± 2 saat boyunca ekstrakte edilir. İstenirse diğer ekstraksiyon süreleri ve sıcaklıkları kullanılabilir, ancak USP Genel Bölüm 661 sınırları geçerli olmayabilir.
Polietilen veya polipropilen numuneler için, önerilen testler ağır metaller (yalnızca su ekstraksiyonu) ve NVR (su, alkol ve heksan ekstraksiyonu). Numunelerin oral sıvılarla temas halinde olabileceği durumlarda tamponlama kapasitesi testi (yalnızca su ekstraksiyonu) da önerilir.
Genel plastikler için, su ekstraksiyonu kullanılarak dört analizin tümü önerilir. Uçucu olmayan kalıntı 5 mg'ı geçmediğinde ROI testi gerekli değildir.
Tamponlama kapasitesi: Bu test, ekstrakte eklenen ve iyon aktivitesinde (pH) önemli bir değişikliğe neden olan asit veya baz miktarını ölçer.
Uçucu olmayan kalıntı (NVR): Bu test, ekstrakttaki 105°C veya üzerinde bir sıcaklıkta uçucu olmayan herhangi bir maddenin miktarını belirler.
Tutuşmada kalıntı (ROI): Bu test, sülfürik asit varlığında 600°C'de veya üzerinde uçucu olmayan uçucu olmayan kalıntı testinden elde edilen herhangi bir maddenin miktarını belirler. Bir ROI testinden önce bir NVR testi gerçekleştirilmelidir.
Ağır metaller: Bu test, özütte bulunan ve sülfür iyonu tarafından renklendirilen metalik safsızlıkları tespit eder. Normalde bu teste yanıt veren metaller kurşun, cıva, bizmut, arsenik, antimon, kalay, kadmiyum, gümüş, bakır ve molibdendir. Ağır metallerin toplam miktarı milyonda 1 parçayı (ppm) geçemez.
Fizikokimyasal USP Plastik Testleri söz konusu olduğunda Science by EUROLAB, 25 yılı aşkın endüstriyel laboratuvar tecrübesi, uzman ekibi ve son teknoloji araçları ile sizlere en iyi hizmeti sunmayı taahhüt eder.